Shop
Icom FC-2100D
VHF AND UHF DIGITAL TRANSCEIVERS
Big on Audio, Small on Size
1500 mW Class Leading Audio
VHF/Full keypadIC-F1100DT
VHF/Simple keypadIC-F1100DS
VHFIC-F1100D
UHF/Full keypadIC-F2100DT
UHF/Simple keypadIC-F2100DS
UHFIC-F2100D
Deskripsi
| General | IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D | |
| Frequency coverage* (*Varies according to version) |
136–174 MHz (NXDN/dPMR) | 400–470 MHz (NXDN/dPMR USA/EUR/EXP) 450–512 MHz (NXDN, USA) 450–520 MHz (NXDN, EXP) |
|||
| Number of channels | 128 channels/ 8 zones | 16 channels | 128 channels/ 8 zones | 16 channels | |
| Type of emission* (*Depending onversion) |
11K0F3E, 4K00F1E, 4K00F1D (USA) | ||||
| 16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EXP) | |||||
| 16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EUR) | |||||
| Power supply requirement | 7.5V DC nominal | ||||
| Current drain (approx.) |
Tx | 1.3A | 1.6 A (at 5 W) 1.4 A (at 4 W) |
||
| Rx | 520 mA /110 mA (Max. audio (internal SP)/Standby) |
520 mA /110 mA (Max. audio (internal SP)/Standby) |
|||
| Antenna impedance | 50Ω | ||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) (USA/EXP) | ||||
| –25°C to +55°C (Radio specification) (EUR) | |||||
| Dimensions (W × H × D; Projections not included) |
IC-F1100DS/D, IC-F2100DS/D: 52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280)IC-F1100DT, IC-F2100DT: 52.2 × 111.8 × 34.1 mm; 2.1 × 4.4 × 1.3 in (With BP-280) |
||||
| Weight (approx.) | IC-F1100D, IC-F2100D: 258 g, 9.1 oz (With BP-280 and MB-133) IC-F1100DS, IC-F2100DS: 266 g, 9.4 oz (With BP-280 and MB-133) IC-F1100DT, IC-F2100DT: 277 g, 9.8 oz (With BP-280 and MB-133) |
||||
| Transmitter | IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D |
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W | 5 W, 2 W, 1 W | ||
| Maximum frequency deviation | ± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) | |||
| Spurious emissions | 70 dB minimum (USA/EXP) | |||
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR/EXP) | ||||
| Frequency stability | ±2.0ppm | ±1.0ppm | ||
| Audio harmonic distortion | 0.8% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
0.7% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
||
| FM Hum and Noise (without CCITT filter) |
46 dB typ. (25 kHz) (EXP), 44 dB typ. (12.5 kHz) (USA/EXP) |
44 dB typical (12.5 kHz) (USA) | ||
| Residual modulations (with CCITT filter) |
51 dB typical (25 kHz), 49 dB typical (20 kHz), 45 dB typical (12.5 kHz) (EUR/EXP) |
54 dB typical (25 kHz), 52 dB typical (20 kHz), 48 dB typical (12.5 kHz) (EUR/EXP) |
||
| FSK error | 5% maximum | |||
| External microphone connector | 3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ | |||
| Receiver | IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D | |
| Sensitivity | Analog (at 12dB SINAD) | 0.24 μV typical | 0.24 μV typical | ||
| Analog (at 20dB SINAD) | –5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
–5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
|||
| Digital (at 5% BER) | –9 dBμV typical emf (0.18 μV typical) |
–8 dBμV typical emf (0.20 μV typical) |
|||
| Adjacent channel selectivity | 77 dB typ. (25 kHz), 75 dB typ. (20 kHz), 67 dB typ. (12.5 kHz), 59 dB typ. (digital) |
76 dB typ. (25 kHz), 75 dB typ. (20 kHz), 69 dB typ. (12.5 kHz), 58 dB typ. (digital) |
|||
| Spurious response rejection | 80 dB typical | ||||
| Intermodulation rejection | Digital | 71 dB typ. (USA/EXP), 74 dBμV emf typ. (EUR/EXP) |
70 dB typ. (USA/EXP), 74 dBμV emf typ. (400–470 MHz, EUR/EXP) |
||
| Analog | 76 dB typ. (25 kHz, EXP), 75 dB typ. (12.5 kHz, USA/EXP), 69 dB typ. (EUR/EXP) |
77 dB typ. (25 kHz, EXP), 77 dB typ. (12.5 kHz, USA/EXP), 70 dB typ. (EUR/EXP) |
|||
| Hum and noise | (With CCITT filter) | 48 dB typ. (25 kHz, EXP), 43 dB typ. (12.5 kHz, USA/EXP) |
42 dB typical (12.5 kHz, USA) | ||
| (Without CCITT filter) | 51 dB typ. (25 kHz), 49 dB typ. (20 kHz), 46 dB typ. (12.5 kHz) (EUR/EXP) |
50 dB typ. (25 kHz), 48 dB typ. (20 kHz), 45 dB typ. (12.5 kHz) (EUR) |
|||
| AF output power (at 5% distortion 8Ω load) |
Internal SP | 1500 mW typical | |||
| External SP | 450 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected*) |
400 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected*) |
|||
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω | ||||
